p.7
Anglerfish Crea�ve Ligh�ng
|
Anglerfish
Trigger V1.0
Switching Modes
The trigger has two modes:
red
and
blue
. The
red
mode is
used only when the
trigger is u�lized with the electronic sync
cable.
The
blue
mode allows the user to u�lize both the
op�cal cable and the electronic sync cable. To switch
between modes simply hold the small magnet provided
against the magne�c switch
area
while the unit is powered
up. The menu LED should turn
purple
un�l the magnet is
released,
a�er which the trigger mode changes.
The op�cal trigger mode (
blue
) uses
a small high power LED
to trigger the remote
strobe. In the
blue
mode, the trigger
consumes
slightly
more power. While using the electronic
sync cable, it is recommended set
the trigger to
red
mode to
conserve power.
Low Battery Indicator
If the
trigger’
s batery power is low,
the trigger’
s menu LED
will blink
red
and
blue
for five cycles and the trigger will
Summary of Contents for TRIGGER V1.0
Page 1: ...USER GUIDE ANGLERFISH TRIGGER V1 0...
Page 2: ......
