12
The Angénieux Prime series design spirit was to keep as much as possible the same mechanical dimensions for a maximum of lenses. Due to
mechanical and optical design constraints, we had no other choice than having two different types of rear mechanics to be compatible with the
maximum cameras on the market.
IMPORTANT:
Angénieux will decline any responsibility for any camera mount damage due to improper configuration of the lens rear filter.
Focal lengths F18, F21, F24, F28, F32, F40 equipped with the standard rear filter are compatible
with all digital cameras. Standard filter barrel
is engraved “DIGITAL CAMERA COMPATIBLE”.
This barrel and a 40.5mm filter are mounted as a standard only on F18, F21, F24, F28, F32, F40.
Filter thread is 40.5mm.
For focal lengths F50, F60, F75, F100, F135, F200
always be cautious to use the proper rear filter mechanical interface.
For
S35 cameras
, do always use the filter barrel engraved
“USE ON S35 DIGITAL CAMERAS”.
This barrel and a 40.5mm filter are only included with F50, F60, F75, F100, F135, F200.
Filter thread is 40.5mm.
For
FF cameras
, larger filter use prevents noticeable vignetting in the edges on a 46.3mm sensor
diagonal. It’s recommended to use the filter barrel engraved “DO NOT USE ON S35 CAMERAS”.
This barrel and a 46mm filter are mounted as a standard only on F50, F60, F75, F100, F200.
Filter thread is 46mm.
Focal length
F18
F21
F24
F28
F32
F40
F50
F60
F75
F100
F135
F200
Rear filter thread for S35 (mm)
40.5
40.5
40.5
40.5
40.5
40.5
40.5
40.5
40.5
40.5
40.5
40.5
Rear filter thread for FF (mm)
46.0
46.0
46.0
46.0
46.0
46.0
If you have any doubt on the use of your lens on a camera please contact your local reseller or our service team at:
5 - Mechanical camera compatibility