Operation
Instruction for PC Encoding
NOTE: If your amplifier does not have an input suitable for phono cartridges, you will need
to purchase a separate phono amplifier for moving magnetic cartridges. This separate phono
amplifier will then connect between your turntable and your amplifier.
Useful Tips
：
The turntable should be positioned on a low-resonance surface such as wood or multiple
layer ply board to avoid structural vibrations disturbing playback.
Maintenance and Cleaning
Cartridge Replacement
Your turntable requires little of no regular maintenance. Remove dust with a slightly
damp antistatic cloth. Never use a dry cloth, this will create static electricity and
attract more dust!
Antistatic cleaning agents are available at specialist stores, but must be applied
sparingly to avoid damage to rubber parts. It is recommended to install the needle
cover before cleaning or maintenance is carried out to avoid damage.
If the turntable is not used over a long period of time, the drive belt should be
removed to prevent unequal stretching.
1
.
Before replacement, put the stylus protector back on the stylus to prevent damage
to the stylus during the replacement process.
2
.
Carefully remove the wire leads from the original cartridge.
3
.
Loosen the two screws on the headshell that are securing the cartridge and then
remove the original cartridge.
4
.
Mount the new cartridge to the headshell and tighten it lightly. Do not completely
tighten the screws at this moment.
5
.
Connect the wire leads to the new cartridge’s terminals. The wire lead color codes
are as below:
White Left channel positive (L+) Red Right channel positive (R+)
Black Left channel negative (L–) Black Right channel negative (R-)
- 17 -
- 16 -
3) After opened, it will come to the following menu, click “YES” to go to “Llame_enc.dll”,
and find the file’s location.
4) After you find the “lame_enc.dl” file, open it and click “Y” to finish the installation.
