- 8 -
IT
AUS
DE
FR
ES
To start and stop the appliance, proceed as follows.
Starting
1- Light the burners (see page7).
2 - Press key (
A
) and then key (
B
) to activate the oil
"melting" procedure.
N.B.: when the preheating temperature is reached the
beeper sounds; press key (C) to deactivate the "melting"
function. The temperature is maintained at 100°C until
cooking starts.
3 - Press key (
D
) to activate the temperature input
mode.
4 - Press keys (
D
and
C
) to set the cooking tempera-
ture.
N.B.: the data set on the control panel are retained in the
memory until the gas supply is turned off.
5 - Press key (
A
) to terminate the temperature main-
tenance function.
6 - Press key (
B
) to start the cooking cycle.
N.B.: lights (E and F) flash while the oil is heating
to the temperature of use, and remain constantly on
once the temperature is reached.
To display the temperature set during cooking, press
key (D).
Stopping
Press key (
B
) to stop the cooking cycle.
Important
If the electricity supply is cut off for less
than 20-40 seconds, the cooking cycle re-
starts automatically.
If the blackout lasts more than 40 seconds,
press key (B) to restart the cooking cycle.
STARTING AND STOPPING COOKING
To carry out this operation, proceed as follows.
Important
Before proceeding, allow the appliance to
cool for 10-15 min., so that the oil reaches a
temperature between 50 and 120°C.
1- Open the hatch (
A
).
2 - Fit the extension (
B
) onto the tap (
C
).
3 - Place the drain container (
B
) and the filter (
D
),
both available as optionals, underneath the ex-
tension (
E
).
4 - Turn on the tap (
C
) to empty the well.
5 - Turn off the tap (
C
) on completion of the opera-
tion.
Caution - warning
Do not dump oil in the environment; dispose
of it in accordance with the laws in force in
the country of use.
FILTERING OIL
F
A
IDM-39603615600.tif
C
D
E
B
G
A
C
B
E
C
D
IDM-39603313200.tif
