Otter Haven Fountain
AD94061
We hope you will find these instructions helpful in setting up your product.
If you have any issues with this item, DO NOT return the unit to place of purchase.
Please visit our web site
www.angelodecor.com
for assistance and warranty information.
Locate the tubing from inside the
fountain and connect it to the
pump.
Assemble all parts in your work area.
The pump is preset to full strength.
If splash is a concern, adjust as
needed.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
Product must be properly stored for winter.
Locate the tubing from inside the
fountain and connect it to the
pump.
Place the pump flat inside the reservoir. Align the
pump cord with the groove and install the pump
access door.
Assemble all parts in your work area.
The pump is preset to full strength.
If splash is a concern, adjust as
needed.
The final assembly should look
like this
