manualshive.com logo in svg

Angell AGDH 3QQ, Quick Start Manual

Share
Download
Angell AGDH 3QQ Quick Start Manual Download Page 6

 

6

               

     

 

 

 

 

 
 
 

CHARGING THE BATTERY before you go… 

 
IMPORTANT: Charge the scooter overnight before your first use.    It is advised that the unit to be fully 
charged (4-6 hours) and fully discharged (ride until the battery gauge indicates low battery) for the first 
three times to maximize the efficiency of the battery.  Do not leave the battery uncharged for more 
than 3 months.    You should charge the battery frequently, at least once every 30 days to prolong the 
battery lifespan. 

 
 

 

 

N 

 
 
 

 
 
 

15.    Plug in the power connection plugs and screw it tight.   
The pins of the two plugs are different.    Ensure that the 
female and male connectors match.   

Plug the charger into the charger socket before connecting the to a wall power 
outlet.  Blinking green light (LED) on the charger indicates that the scooter is 
charging.    The light (LED) will stop blinking when scooter is fully charged.   

Summary of Contents for AGDH 3QQ








Reviews:

No comments

Brands by name

Popular brands

Load more brands