4
IMPORTANT: Ensure that all 4 pairs of bolts and nuts are screwed on TIGHTLY. Failure to do this can
be hazardous.
IMPORTANT: All three seat posts should be aligned properly to ensure seat is in a straight position.
Ensure that the seat is lock on TIGHTLY. Failure to do this can be hazardous.
7. Extend the
handlebar tube to
full upright position
and slide it down
onto the front fork.
4. Insert bolts
（
M10X55) and
nuts.
5. Tighten the bolts and
nuts using the open –end
wrenches provided.
6. Tighten self-locking bolts and nuts
using Allen wrench (3mm).
9. Push in the quick release button and slide in
the seat support tube.
10. Then slide the seat into the seat
support tube. Tighten the quick release.
8. Ensure that the
handlebar is facing front, the
brake on the left side and
the throttle on the right;
then tighten the handlebar
collar clamp using the
enclosed Allen wrench
(6mm).
