Installation Guide
Angel Armor Ballistic Door Panel (Level IIIA) for Chevy® Tahoe PPV
970 235 2961 [email protected] angelarmor.com
7
Procedure
Complete the following steps to
properly install the Angel Armor
Avail Ballistic Door Panel (Level
IIIA) into a Chevy Tahoe PPV.
Preparing for Installation
1
Roll your window all the way up.
2
Turn off the ignition switch and
remove the key.
Detaching the Interior Door Panel and
Replacing the Window Regulator Bolt
1
Remove the door lock by completing the
following procedure:
a
Unlock the vehicle door.
b
Gently pry open the retainer panel on
the inside of the plastic lock knob using
a small trim removal tool (see Figure 5
below).
c
Lift the plastic lock knob off of the
lock rod.
2
Remove the trim cover behind the interior
door handle.
Figure 5. Prying open the panel on the plastic lock knob
Figure 6. Trim cover and bolt locations
Door Handle Trim Cover and Bolts
Arm Rest Trim Cover and Bolts
