8
half
full.
2 Fit the sealing ring into the blade unit.
3 Turn the blade unit upside down. Lower it into the jar,
blades down.
4 Screw the blade unit onto the jar until it is finger tight.
5 Place the mill onto the power unit and turn to lock
.
6 Switch on to maximum speed or use the pulse control.
7 After milling, you can replace the blade unit with the
sprinkler lid and shake out your food.
8 The sprinkler lid is not airtight.
Hints
Herbs are best milled when clean and dry.
Care & cleaning
1 Always switch off and unplug before cleaning.
2 Handle the blades and cutting discs with care - they are extremely sharp.
3 Some foods may discolour the plastic. This is perfectly normal and won
=
t harm the
plastic or affect the flavour of your food. Rub with a cloth dipped in vegetable oil to
remove the discolouration.
Power unit
Wipe with a damp cloth, then dry. Ensure that the interlock area is clear of food
deris.
Liquidiser/mill
1 Empty the jug/jar before unscrewing it from the blade unit.
2 Wash the jug/jar by hand.
3 Remove and wash the seals.
4 Don
’
t touch the sharp blades, brush them clean using hot soapy water, then rinse
thoroughly under the tap. Don
=
t immerse the blade unit in water.
5 Leave to dry upside down.
All other parts
Wash by hand,then dry.
Alternatively they can be washed on the top rack of your dishwasher. A short low
temperature programme is recommended.
Customer care
If the cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
