2
Before using your machine
●
Read these instructions carefully and retain for future reference.
●
Remove all packaging and any labels.
Safety
●
The blades and discs are very sharp, handle with care.
Always hold the knife blade by the finger grip
at the
top, away form the cutting edge, both when handling
and cleaning.
●
Do not lift or carry the processor by the handle - or the handle may break resulting in
injury.
●
Always remove the knife blade before pouring contents from the bowl.
●
Keep hands and utensils out of the processor bowl and liquidiser jug whilst connected
to the power supply.
●
Switch off and unplug:
before fitting or removing parts.
after use.
before cleaning.
●
Never use your fingers to push food down the feed tube. Always use the pusher supplied.
●
Before removing the lid from the bowl or liquidiser/mill from the power unit:
Switch off.
Wait until the attachment/blades have completely stopped.
Be careful not to unscrew the liquidiser jug or mill from the blade unit.
●
Allow all liquids to cool to room temperature before placing them in the liquidiser.
●
Do not use the lid to operate the processor, always use the on/off speed control.
●
This machine will be damaged and may cause injury if the interlock mechanism
is subjected to excessive force.
●
Never use an unauthorised attachment.
●
Never leave the machine on unauttended.
●
Never use a damaged machine, if break, please get it repaired in the designated
maintain place.
●
Never let the power unit, cord or plug get wet.
●
Don
’
t let the wire hang over the edge of a table or worktop or touch hot surfaces.
●
Do not exceed the maximun capacities stated.
●
This appliance is not intended for use by persons (including children) with reduced
physical,sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
●
Only use the appliance for its intended domestic use.
Before plugging in
Make sure your electricity supply is the same as the one shown on
the underside of your machine.
