-1-
Instruction manual
■
Pressurized container
ＰＣ−１８Ｄ
,
ＰＣ−１８ＤＴ
■1．
Specifications
PC18-D
Ｔ（
for water-base paints
）：
inner surface is fluorine-coated, other wet
surfaces are stainless steel.
Capacity
(liters)
Max.
Operating
Pressure
MPa
Ambient
Temperature
℃
Viscosity
Range
Air hose
Connection
IN side
Air hose
Connection
OUT side
Fluid hose
connection
Width
×
Height
mm
Mass
g
PC-18D
2.0
0.34
5
〜
40
〜
300
ｃＰ
Ｇ
1/4
Ｇ
1/4
Ｇ
3/8
150
×
345
1250
PC-18DT
1200
■2．
Safety precautions
WARNING
Wear protective gear.
・
Be sure to wear protective gear such as proper glasses, mask and gloves during operation.
If not, paint or solvent can enter eyes or lungs.
Pay attention to ventilation.
・
Use it a well-ventilated site. Use at badly ventilated or narrow site can cause organic solvent poisoning by
sprayed paints or volatile solvents.
・
If you feel something wrong with your body during operation, immediately see a doctor.
Operating site must be strictly free from origins of explosions and fires.
・
Never use it in a flammable site. Especially the following can cause ignitions or spark:
・
open fire such as cigarettes,
・
electrical equipment such as stoves, lamps and heaters
Be careful about rupture.
・
Take special care not to drop it. Never use it with even the slightest damage.
・
If lower outside reinforcing sleeve of container becomes loose, it can damage the bottom of the container,
causing danger.
If the sleeve becomes loose, immediately stop operation and contact the shop which sold it to you.
(refer to figure on page 2)
・
Such product can rupture due to reduced ability to withstand pressure.
・
Use it at lower than max. Operating pressure. If not, product can become damaged, causing great danger.
・
Always keep safety valve clean A dirty safety valve can cause failure, creating higher than max. Operating
pressure on the inside and damaging product.
・
Before removing container set, be sure to turn off supply air and release pressure inside container by release
valve.
If you remove container which is under pressure, liquid in container and parts can fly, causing great danger.
Never alter product.
・
Never alter setting pressure of safety valve.
Safety valve is designed to leak air at 0.34MPa in the container.
If you alter setting pressure, higher than max. Operating pressure is put in container, causing damage of
product.
・
Be sure to use genuine parts when replacing parts. If not, it can cause inferior performance and damage product.
Be careful about grounding
・
Securely ground spray gun, work pieces and container containing paint and solvent. Insufficient grounding
can cause explosion or fire due to static spark.
・
When exhausting paint and solvent during cleaning, be sure to use metallic container which receives them,
and be sure to ground the container.
Never use it for food industry.
・
Do not use it for food industry. If done, foreign matter mixed with parts can cause health problems since it
does not use materials which are suitable for food.
・
Never use halogenated hydrocarbon liquids such as trichloroethane and trichloroethylene.
If done, it can cause chemical reaction with product and cause cracks.
The Japanese version is
printed on the back page.
This instruction manual includes important warnings, cautions and
operations. Before use, be sure to read and fully understand this
instruction manual. This product is exclusively for coating purpose.
Do not use it for other purposes. The operator shall be fully
conversant with the requirements stated within this instruction manual.
Keep this instruction manual in an appropriate place for immediate
reference.