Anest Iwata ALG-7, Instruction Manual

Page: 7 / 14

- 1 -
Airless Spray gun
Be sure to observe warnings and cautions in this instruction manual.
If not, it can cause paint ejection and serious bodily injury by drawing organic solvent.
Be sure to observe following marked items which are especially important.
WARNING
Indicates a potentially hazardous situation which, if not avoided, may result in serious injury or loss of life.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or
property damage.
Indicates notes which we ask you to observe. The safety precautions in this instruction manual are the
minimum necessary conditions. Follow national and local regulations regarding fire prevention, electricity and
safety as well as your own company regulations.
■
Important specifications
Max. Pressure
２５ＭＰａ
/
２５０ ｂａｒ
/
３６２６ ＰＳＩ
Noise level
６２．９ ｄ Ｂ （Ａ）
Spray condition Used nozzle tip.; NT-3005
Fluid pressure. ; 10 MPa / 100 bar / 1440 PSI
Measuring point
1m backwards from gun,1.6 m height
Max. Temperature
Atmosphere
５℃～４０℃
Air
・
Fluid
５℃～４３℃
■
Main specifications
Model Use Hose connection Filter
Mass
ｇ
(lbs)
ALG-7
General G 1/4
100 mesh
(built-in)
440 (0.97)
ALG-72 415 (0.91)
ALG-73
High viscosity
G 3/8
Included
(not built-in)
450 (0.99)
This Anest-iwata airless spray gun kit complies to
ATEX regulations 94/9/EC,
Protection level
：
Ⅱ
2 G X
，
Suitable for use in Zones 1 and 2.
X marking
：
Any static electricity discharge from the airless
spray gun is to be diverted to the grounded
the conductive fluid hose as stipulated.
ALG-7 / ALG-72 / ALG-73
This manual contains IMPORTANT WARNINGS and INSTRUCTIONS.
Equipment in this manual is exclusively for painting purposes.
Do not use for other purposes.
The operator shall be fully conversant with the requirements stated in this
instruction manual including important warnings, cautions and operation and
correct handling.
Read and understand the instruction manual, before use and retain for
reference.