AIRWALL
8
4
MECHANICAL INSTALLATION
CAUTION!
Follow the instructions and recommendations contained in this section carefully.
Failure to do so may
result in incorrect installation.
The Anemoi AIRWALL fan has been designed for wall installation. Hollow, pre-frame and facade frame must be
made to install the fan. The wall and frame must be sufficiently supportive to support the weight of the fan and fix
it properly to avoid overturning.
The Anemoi AIRWALL fan is designed so that slats are outside the building and the fan inside.
Before installing the fan, protect and signal the work area to prevent someone from going under. It is recommended
to fence a minimum radius of 4 meters around the fan.
Respect local and national regulations regarding installations at height.
