AIRWALL
12
5.1
Box Control
The connections of the control box are detailed below, the terminals are W, V, U:
5.2
Modbus control (optional)
The Anemoi AIRWALL fan can be controlled by external controller using modbus connexion, please see the
Modbus Configuration Parameters
document provided by Anemoi. The external control is connected direcly to
the fan board using shielded cable type
modbus RS485 2x2x0.50 mm² POSCY.
The following figure shows the detail of the control connectors:
The electrical cables must be arranged in a separate circuit from the control cables to avoid interference.
Power Input Line
Motor Output Line
