AIRPRO [L]
13
5.2
Installation Tools
To install the fan, ensure having the following required tools:
NO.
Name
Quantity
1
Standard wrench set
1
2
Standard socket set with ratchet
1
3
Standard Allen wrench set
1
4
Phillips screwdriver
1
5
Hydraulic cutter
1
6
Torque wrench (5-45 Nm)
1
7
Flat head screwdriver
1
8
Multimeter
1
9
Pair of #14 to #24 AWG strippers
1
10
Electronic level
1
5.3
I-Beam Conditions
In case of I-Beam installation, make sure the minimums requirements are met:
Please consult with structural engineer to make sure your building is approved for fan installation.
Minimums requirements for I-Beam are shown below:
1. Width (B) of 135-375 mm
2-1. Thickness (t) of 14-20 mm, the
Mounting Base need 2 I-Beam shims.
2-2. Thickness (t) of 14 mm, the
Mounting Base need 1 I-Beam shim.
SAFETY!
Ensure the minimum requirements are met.
Failure to do so may result in serious personal injury or death
and equipment damage.
