AIRPRO [S]
15
6.1.2
Remote control S Type
The Anemoi AIRPRO [S] fan is operated through a remote control.
You must pair the remote control to the fan before using it.
You need to set up the receiver for the fan to work properly. Please,
follow the following steps:
1 - Open the back cover of the control and place two AAA batteries in
the knob.
2 - Switch on the fan supply and before 30 seconds have elapsed,
press the buttons simultaneously
.
3 - A beep sounds when the devices are paired correctly.
The remote control has the following switches and buttons:
6.2
Modbus control
The Anemoi AIRPRO [S] fan needs an external control to work. The external control is connected directly to the
fan control board using shielded cable type modbus cable RS485 2x2x0.50 mm² POSCY.
The following figure shows the detail of the control connectors:
1 ~ 6
Allows you to adjust fan speeds
Stops the fan
Allows operation in reverse mode (optional). To
be effective, the fan must have a set speed.
