AIRPRO [S]
14
6
CONTROL
The Anemoi AIRPRO [S] fan can be purchased with remote control or with Modbus control. Next, the
particularities of each of the two models are established.
6.1
Remote control
6.1.1
Remote control S Type
The Anemoi AIRPRO [S] fan is operated through a remote control. You
must pair the remote control to the fan before using it.
You need to set up the receiver for the fan to work properly. Please,
follow the following steps:
1 - Open the back cover of the control and place two AAA batteries in
the knob.
2 - Switch on the fan supply and before 30 seconds have elapsed,
press the buttons simultaneously
.
3 - A beep sounds when the devices are paired correctly.
The remote control has the following switches and buttons:
1 ~ 6
Allows you to adjust fan speeds
Stops the fan
Allows operation in reverse mode (optional). To
be effective, the fan must have a set speed.
