AIRLUX
9
3
OPERATION
The Anemoi AIRLUX fan is operated through a remote control. You must pair the remote control to the fan before
using it, as explained in Section 2.9 above. The remote control has the following switches and buttons:
1- ON/OFF: Press it once to turn the fan on or off.
2- LED light control: Use it to turn the LED light on or off.
3- Speed control: Use it to set the fan speed (6 speed levels). The fan starts at the third speed level by
default.
4- Program: Use it to set the time during which the fan will operate. The fan will automatically turn off after
this time. You can set the time at 1,2,4 and 8 hours. The program is correctly set when a blue light
appears.
5- LED Indicators: They appear when a setting has been made and disappear after a few seconds. To
verify the program when the LED indicators are off, just change the speed.
6- 12V battery, type 23A.
You will find a switch to change the fan direction in the battery compartment. When the switch is in the
“S”
position (Summer mode), the air flows downwards. By contrast, when the switch is on the
“W” position (Winter
mode), the air flows upwards.
