14
Step 1:
The Rover 6” Mecanum Chassis is designed to use four (4) Victor SPX (am-3748) speed controllers and a
Hero Development Board (am-3206). The Rover Chassis Bottom Plate (am-4100_bottom) has mounting holes for
all pre-selected components. The following steps cover how and where to install the components but wires have
been removed from the images for clarity. A full wiring diagram can be found at the end of this section.
Electronics Assembly Instructions
Step 2:
Mount the PowerPole Distribution Board (am-
3699) to two (2) S3 Corner Gussets (am-3606) using
M3 x 14mm Socket Head Cap Screws (am-1367) and
M3 Nylock Nuts (am-1023) through the middle hole of
a leg of the gussets.
Step 3:
Mount the PowerPole Distribution Board
assembly to the top of the Bottom Plate using four (4)
M3x14 Socket Head Cap Screws (am-1367) and M3
Nylock Nuts (am-1023) on the underside of the
Bottom Plate.
