6
7
Step 1
Place the table top (A) upside down on a soft, flat surface.
Turn the trestle (B) upside down and align holes with the
corresponding holes in crossbeam.
Step 2
Insert barrel nuts (C) (thread side upwards) into the holes
incrossbeam and trestle.
Insert metal dowels (D) (coned hole facing up) into
corresponding holes.
w
Step 3
Insert set screws (E) into barrel nuts and fasten loosely
with large Allen Key (H) so that all parts are held in
position but not yet fully tightened.
Step 4
Place screws (F) into the appointed holes on the trestle
and fasten with small Allen Key (G).
Tighten set screws with large the Allen Key.
Repeat step 1-4 in opposite end of table.
G
H
A
B
C
D
E
F
Content
A Table top / with 1 or 2 crossbeams*
B Trestle × 2
C Barrel nut × 8 (up to 200cm) / × 16 (from 200cm)
D Metal dowel × 4 (up to 200cm) / × 8 (from 200cm)
E Set screw × 8 (up to 200cm) / × 16 (from 200cm)
F Screws × 20
G Small Allen key
H Large Allen key
Unpack the table and ensure all parts pictured are included.
*Please note that tables up to 200 cm in length have a
single crossbeam, while tables of more than 200 cm have
two crossbeams beneath the table top.
Rectangular top
with wooden legs
Summary of Contents for Sami Kallio In Between SK3
Page 8: ...andtradition com...
