&Tradition Sami Kallio In Between SK3, Instructions Manual

Page: 3 / 8

4 5
B
A
D
C
Content
A Table top / round or square
B Table leg × 3 (up to Ø 90) / × 4 (Ø 91 to Ø 150 cm)
C Screw × 12 (up to Ø 90) / × 16 (Ø 91 to Ø 150 cm)
D Allen Key
Unpack the table and ensure all parts pictured are
included.
Step 1
Place table top (A) upside down. Please make sure to
place table top on soft surface, so that table top will not be
damaged during assembly.
Place legs (B) on table top, aligning each leg with all four
holes as illustrated.
Step 2
Place the screws (C) in the appointed holes and fasten with
Allen Key (D).
Repeat the task for the remaining legs.
Round and square top
with wooden legs
Marble
The marble plate is made from natural marble and will therefore have
variations in structure and colour. This should not be considered a defect
nor a valid reason for claims. The marble is treated with a sealer, but it is
strongly recommended to use a trivet and never place glasses or cups with
liquids directly on to the marble. Spilled liquids will leave permnent stains
due to the natural sensitivity of marble. For daily cleaning of the marble
top it is recommended to use a cleaning agent specifically developed
for stone or mable. It is also highly recommended to do a re-sealing of
the marble every second month, using an appropriate sealer developed
specifically for stone or marble.
Metal
It is recommended only to use a soft dry cloth to clean plated and powder
coated surfaces but in case more severe cleaning is necessary, a soft cloth
wrung in lukewarm water can be carefully applied. Always dry immediately
after cleaning with a soft dry cloth. Avoid using abrasive cleaning agents or
aggressive cleaning detergents on lated or powder coated surfaces as this
may permanently damage the surface
Oiled wood
For daily care, dust oiled furniture with a soft dry cloth. Cleaning can be
done using a soft cloth wrung in lukewarm water following the wood grain
and dried immediately with a dry cloth following the wood grains. For
more severe cleaning a soap specifically developed for oiled wood can be
used. Follow the instructions on the packaging of the cleaning product.
To maintain the look and silky feeling of oiled wood, regular re-oiling is
recommended. Re-oiling should be done when the wood starts to appear
dry or faded. Usually, reoiling four times every year is sufficient.