background image

NEO

fl

 

Water 

Heater 

     4      September 

2015

De-Strati

fi

 cation

If your installation has been equipped with a de-strati-

fi

 cation pump wired from the heater, a pump symbol   

              will show on the display  when it is running.

Other symbols

If the wrong buttons are pressed it is possible that an 
engineering mode might be accidentally entered and 
different symbols will be displayed. In this instance, do 
not press any buttons for at least 60 seconds and the 
control will revert back to a normal display.

Anti Legionella - Default Off

Th

  e heater has the option to automatically run a high 

temperature Anti-Legionella programme. 

Th

 e period 

between these runs and the temperature can be se-
lected by the commissioning engineer.

Frost Protection

Th

  is Heater is provided with frost protection and will 

run if the temperature of the water in the tank drops 
below 6°C and run until it is 16°C. It uses the de-
Strati

fi

 cation pump if 

fi

 tted.  Note: 

Th

  e heater must be 

connected to gas and mains electricity for this function 
to operate.

Cleaning

Th

  e casing is 

fi

 nished with a painted epoxy paint 

and will mark if abrasive cleaners are used. It should 
be cleaned using standard non-abrasive proprietary 
products.

Service & Maintenance

It is a mandatory requirement that any gas work 
carried out must be by a registered engineer with an 
appropriate accreditation.

It is recommended that the Heater is serviced at 
least every twelve months.

Summary of Contents for NEOflo SC25/200

































Reviews: