The 230volt version requires a 13Amp supply and is fitted with
a 13Amp 1363a plug.
EXTENSION LEADS
.
If an extension lead is used, it must be of the correct size
and length to avoid voltage drop.
Cables must be fully uncoiled when in use, coiled or incorrectly
installed extension leads can overheat and cause a fire hazard.
Earth fans (class 1)
Plugs must be wired to the following code
Brown - Live
Blue
– Neutral
Green/Yellow
– Earth
Set up & operation
Set the unit up on a firm, level surface and do not site the unit
close to any personnel wearing contact lenses, sensitive to any
dust movement, hay fever sufferers etc. This unit moves air
only, but minute particles of dust / pollen etc. will also be
moved, especially on highest fan setting, so careful location
and use of speed control will require careful consideration.
GENERAL SAFETY CHECK
Check the cable to ensure there are no breaks, or joints.
Check the plug to ensure it is not damaged in any way.
USER OPERATION
As with all electrical equipment care should be exercised when
using the fan. Familiarity with its controls and functions will
enable the user to operate it safely.
1) Ensure that there is a clear air path both in front, and
behind the unit