Warnings
Do not attempt to use this equipment before the following
instructions are read and fully understood.
Do not operate this equipment if it has missing, damaged,
insecure guards or electrical components.
Ensure equipment is sited on firm level ground.
Locate the fan away from any possible unauthorised
interference.
Ensure electrical supplies are of adequate capacity.
Electrical installations must comply with current IEE
regulations.
The user must not undertake any service or repair of
equipment.
Ensure any materials exhausted through the outlet are
deposited safely.
If in close proximity of an ASF950 in operation ear protection,
and eye protection should be used.
Ensure debris or detritus cann
ot be drawn into the fan’s airflow,
as with all powerful fans it will exit in the air flow and may be a
hazard.
ANY DOUBT CONCERNING APPLICATION / INSTALLATION
CONSULT YOUR SUPPLIER.
Electrical Supply
All electrical installations must comply with current IEE
regulations.
It is recommended that electrical supplies are protected by
earth leakage circuit breakers (ELCB).
Both 230volt and 110volt ASF950 fans are available
The 110volt version requires a 1ph 110V + earth 50 Hz
electrical supply terminated via an 110V 32 Amp appliance
inlet. Refer to data plate for electrical specification.
.
.