°F setpoint
idle
°F setpoint
idle
‘Setpoint’ flashes
4. To lower the temperature setpoint, press the ‘Temperature
Down’ button until the desired temperature is shown on the
water heater display (Fig. 52).
Fig. 52
‘Setpoint’ stops flashing
5. When the desired setpoint is reached on the water heater
display, press the ‘Set’ button to confirm the new setpoint.
‘Setpoint’ stops flashing in the water heater display
(Fig. 53).
Fig. 53
6.6.6 To display and change temperature format
(°F/°C)
1. While in ‘Service Mode’, press ‘Select’ button until
‘°F/°C’ is shown in the upper right portion of the water
heater display (Fig. 54).
Fig. 54
2. Press ‘Set’ button to change temperature format.
‘°F/°C’ symbol will flash in the water heater display (Fig. 55).
‘°F/°C’ Flashes
Fig. 55
43
Summary of Contents for 10/105
