Installation Instructions
The installation, maintenance, or removal of antenna systems requires qualified, experi-
enced personnel. Andrew installation instructions have been written for such personnel.
Antenna systems should be inspected once a year by qualified personnel to verify proper
installation, maintenance, and condition of equipment.
FCC exposure limits require minimum separation of 2 m between the user and the
radiating elements.
Andrew disclaims any liability or responsibility for the results of improper or unsafe instal-
lation practices.
Notice:
Mount Antenna
1
Select Antenna Polarization.
Use antenna polarity indicator on back
cover (see Figure 2). Rotate antenna 90° to change polarity.
Antenna Polarity Indicator
(shown Horizontal polarity)
Rotate Antenna 90 degrees
Counterclockwise for Vertical Polarity
Antenna RF Connector
Type 'N' Female model QD-24-0010
(50 Ohm Shown)
Type 'F' Female model QD-24-0040
(75 Ohm)
Standard
Mounting Bracket
Figure 2 - Back Cover Details
2
Assemble Mast Clamp (Figure 3) to Mast Bracket.
Slide mast clamp
legs into slot on mast bracket (Figure 4), then slide up to top of the slot
(Figure 5).
Figure 3 - Mast
Clamp
Figure 4 (Antenna
Removed for Clarity)
Figure 5 (Antenna
Removed for Clarity)
5
3
Mount to Mast (Figure 6).
Slide unit with mast clamp
over suitable mast (up to 2 inch-
es) and secure with included L
Bolt.
Figure 6 - Unit
Mounted to Mast
