background image

 

27 February, 2001

 

 
 
 
 

USERS GUIDE 

for the 

SELECTAMP CDMA 800 CHANNELIZED AMPLIFIER 

 

 
 

MANUAL NO. AE04B-A0279 

REVISION -- 

 
 

 

 
 
 

The information set forth in this document and all rights in and to inventions 
disclosed herein, and patents which might be granted thereon disclosing, 
employing or covering the materials, methods, techniques or apparatus 
described herein are the exclusive property of Andrew Corporation. 

 

This document is an operation and maintenance manual.  No disclosure or 
reproduction of the information or drawings shall be made of any other 
purpose without the prior written consent of Andrew.  Use of the information 
contained herein to fabricate or assemble any item in whole or in part is 
expressly prohibited. 

 

These goods are subject to U.S. Department of State, International Traffic 
in Arms Regulations, 22 CFR 120-130. 

 

This transmitter is intended for use at fixed base station sites only, and is 
not to be marketed for mobile use.  As such, under Section 1.1307 of the 
FCC Rules, the transmitter is not currently subject to the Commission’s 
environmental rules pertaining to the routine evaluation for RF exposure 
prior to equipment authorization. 

 

 

2601 Telecom Parkway Richardson, Texas 75082-3521 

Phone: 972-952-9700  Fax: 972-952-0019

 

Summary of Contents for SelectAmp CDMA 800





























Reviews: