Andrew Corporation – Base Station Systems Group Page 6
Proprietary – Use pursuant to Company Instruction
Installation and Operation Set-Up
Each OneBase™Cell Extender subrack is specifically designed for a specific cellular
system by using the correct combination of components and the correct electrical wiring
and RF cabling of these components. The components of the OneBase™Cell Extender
subrack are electrically connected with a combination of blind mate rear connections and
front panel connections to optimize flexibility and ease of maintenance.
The MCPA Modules are vertically arranged and blind-mated to their RF and DC/control
interfaces in the rear of the subrack. The RF Interface Module (RFIM) is also vertically
arranged and is located to the right side of the MCPA modules. The Filter Modules are
situated at the top portion of the subrack mounted either vertically or horizontally. The
filters interface to the SCM through blind-mate “N” connectors.
FCC Statements: FCC ID: S8L-OBEMCPA
This device complies with Part 2, 15, 22, and 24 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Warning
Changes of modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
RF exposure compliance is addressed at the time of licensing, as required by the
responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).
Industry Canada Statements: IC:2237F-OBEMCPA
1. Quality Norms :
The testing of the equipment is carried out as the norms laid in IC
standards.
2. Labeling : OneBase™ Cell Extender subrack when sold in Canada will have:
(a) The certification number, prefixed by the term "IC: ", i.e. IC:2237F-OBEMCPA
(b) The manufacturer's name, trade name or brand name, i.e. Andrew Corporation
(c) A model name or number. Model Name = OneBase™ Cell Extender
(d) This device complies with RSS-131, RSS-102 of the IC Rules.
3. External Control
The OneBase™ Cell Extender subrack does not have any external controls accessible to
the user for any adjustments, to operate in violation of the limits prescribed in this
Standard. Furthermore, information on internal adjustments, reconfiguration or
