Infinity CMX Installation Guide
21
• INFINET RD—Flashes every 0.5 sec when the Infinet is receiving
data.
• SCAN—Flashes once for every scan of the controller.
• ERROR—Lights up if the controller fails the internal integrity
check.
• INFINET TD—Flashes every 0.5 sec when the Infinet is transmitting
data.
Using the CLEAR MEMORY Button
The CLEAR MEMORY button is the red button in the lower center of
controller. You press the red button only to cold start the controller.
Connecting the Andover Controls Service Tool
The SERVICE PORT, on the far left side of the bottom of the control-
ler, is to connect the Andover Controls Service Tool to an the CMX. The
service tool will access all Infinet controllers on the same Infinet. For
information on availability of the Andover Controls Service Tool, con-
tact your Andover Controls representative.
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
