DN:KD-752-SMSY01 V1.0 Operation Guide
13/19
9. SYNCHRONIZING STORED RESULTS
a. In Standby Mode
, press “MEM” button, the monitor will wait Bluetooth connect and
Bluetooth symbol flashing after confirming the group. Bluetooth symbol will stop
flashing when Bluetooth is connected. When the Electronic Sphygmomanometer has
finished memory synchronization, Bluetooth symbol will disappear. If an accident
happens, synchronous unfinished, Bluetooth symbol will also disappear.
b. When Bluetooth is disconnected, the monitor will turn off automatically after 1 minute
with
no operation. You can also press the “START” button to turn off the monitor
manually.
10. DELETING MEASUREMENTS FROM THE MEMORY
When any result is displaying (exclude average value displaying), keeping on pressing the
“MEM” button for three seconds, all results in the current bank will be deleted .
See picture
10.
Press the
“START” button, the monitor will be turned off.
Picture 10
11. ASSESSING HIGH BLOOD PRESSURE FOR ADULTS
The following guideline for assessing high blood pressure (without regard to age or gender)
has been established by the World Health Organization (WHO). Please note that other factors
(e.g. diabetes, obesity, smoking, etc.) need to be taken into consideration. Consult with your
physician for accurate assessment, and never change your treatment by yourself.
