DN:KD-5917-SMSY01 V3.0
Operation Guide
Template version:1
6/15
measures:
—
Reorient or relocate the receiving antenna.
—
Increase the separation between the equipment and receiver.
—
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
—
Consult the dealer or an experienced radio/TV technician for help.
18. This blood pressure monitor is verified by auscultatory method. It is recommended that
you check annex B of ANSI/AAMI SP-10:2002+A1:2003+A2:2006 for details of verification
method if you need.
SETUP AND OPERATING PROCEDURES
1. BATTERY LOADING
a. Open battery cover at the back of the monitor.
b. Load four
“AA” size batteries. Please pay attention to polarity.
c. Close the battery cover.
When LCD shows battery symbol
, replace all batteries
with new ones.
Rechargeable batteries are not suitable for this monitor.
Remove the batteries if the monitor will not be used for a month
or more to avoid relevant damage of battery leakage.
Avoid the battery fluid to get in your eyes. If it should get in your eyes, immediately
rinse with plenty of clean water and contact a physician.
The monitor, the batteries and the cuff, must be disposed of according to local
regulations at the end of their usage.
2. CLOCK AND DATE ADJUSTMENT
a. Once you install the battery or turn off the monitor, it will enter Clock Mode, and
LCD will display time and date.
b. While the monitor is in Clock Mode, press
the “START” and “MEM” button
simultaneously for two seconds, the month will blink at first. Press the button
“START” repeatedly, the day, hour and minute will blink in turn. While the number
is blink
ing, press the button “MEM” to increase the number. Keep on pressing the
butt
on “MEM”, the number will increase fast.
