Anderson RBMPRO 2000, Operator'S Manual

Page: 32 / 101

32 Operator's Manual – Self-loading Trailer Anderson Group
2. Disconnect the hydraulic hoses and the power to the lights (see "Connecting the hydraulic
and electrical systems" on page 34).
3. Put the jack in vertical position (Figure 7).
4. Chock the wheels and apply the trailer handbrake (if applicable).
5. Remove the cotter pin from the hitch pin, remove the hitch pin, and remove the safety chain
(Figure 6).
6. Uncouple the equipment drawbar from the tractor drawbar.
Figure 6 — Hitching to the Tractor
Figure 7 — Hydraulic Jack Extended (A) and in Transport Position (B)