34
Operator's Manual – Self-loading Trailer
Anderson Group
3.2 Connecting the hydraulic and electrical systems
There are two ways to connect the hydraulic system:
l
Using load sensing (ideal);
l
Directly to the hydraulic outlets on the tractor.
NOTE:
Consult the operator's manual for your tractor to identify
the hydraulic hoses.
To use the RBMPRO 2000 self-loading trailer, the tractor must have:
l
2 double-acting hydraulic valves (one valve corresponds to one 1/2-in. valve female inlet and
outlet);
l
1 free return fitting;
l
1 direct pump outlet;
l
1 load-sensing outlet;
l
1 12-V electrical power supply
For optimal use, one of the valves must have a detent for continuous pumping.
If the connections are reversed:
l
The equipment will not work;
l
An error message will be displayed on the
control screen.
This could result in equipment failure!
Relieve the pressure in the tractor's hydraulic
system and ensure that the couplings are clean
before connecting them to the tractor. Dirt will
contaminate the hydraulic oil.
The recommended oil flow rate is 60 lpm (15 US
gpm).
The tractor must be stopped before the fittings are
connected.
