background image

 

 

 

Double Stretcher – Operator’s Manual 

Anderson Group  

Group Anderson Inc. 

Warranty Policies, Procedures, & Provisions Summary 

Purpose of Warranty: 

The fundamental responsibility of warranty is to correct defects in material and workmanship of 
the  products  sold  by  Group  Anderson  Inc.  (hereafter  called  ‘’Anderson’’).    This  outline  is 
intended to assist you in awareness of Anderson’s Warranty Policies and to assure that you 
obtain the best service possible for your Anderson machine. 

 

Warranty is limited to 1-year (12months).  This specified period begins on the date 
the new equipment is sold to the customer. 

 

Warranty is non-transferable in the event of resale unless the resale is through an 
authorized Anderson dealer. 

Warranty Exemptions: 

 

Your warranty may be voided if Anderson determines that the equipment has been 
subjected to bad treatment or negligence, has been used inappropriately, has not 
received necessary maintenance, not been appropriately protected during storage, 
damaged by vandalism, bad weather, natural elements, collision, or an accident. 

 

The warranty is void if your equipment has been modified in any way without 
Anderson express authorization. 

 

The warranty does not cover towing expenses or service calls. 

 

No warranty is extended to regular service items such as fluids, paint, tires. 

 

Certain parts, such as the Honda engine and battery are covered under warranties 
from their respective manufacturers.  Details on these warranties can be obtained 
from your dealer. 

 

Warranty does not cover damage caused by harsh weather conditions or unstable 
ground conditions.  Such as frozen parts on the equipment or performance issues on 
inadequate terrain. 

 

No warranty is issued for performance issues.  Including downtime and capacity 
issues.   

No Dealer Warranty: 

 

Except for conditions or warranties which may not be excluded by law, the selling 
dealer makes no warranty of its own on any item warranted by Anderson Group 
unless it delivers to the purchaser a separate written warranty document specifically 
warranting the item.  The selling dealer has no authority to make any representation 
or promise on behalf of Anderson or to modify the terms or limitations of this 
warranty in any way. 

Summary of Contents for NutriWrap 780 SB





































Reviews: