4
2
3
Verify orientation of blind panel. Blind panel tilt control knob will be
located on the lower lock side of window. Set bottom of blind panel
on bottom rail support clips.
Predrill holes, 3/4” deep, through blind panel mounting clips. Fasten
with #6 x 3/4” pan head screws using a Phillips screwdriver.
Center blind panel in window sash.
2
9184660
Lock
Side of
Window
Tilt
Control
Knob
Venting awning and fixed
windows will have tilt control
knob located in lower right
hand corner.
Equal distance at each side.
Windows with a unit height less than
or equal to 4’ will have two mounting
clips per side. Windows with a unit
height greater than 4’ will have three
mounting clips per side.
Blind Panel Mounting Clip
▶
Proceed to step 5 for windows with insect screens.
▶
Proceed to step 8 for windows without insect screens.
Interior
View
5
Unlock and open window. Position insect screen near window opening
