33
faq@@s
faq@@s
32
ƅ
The Sound comes out but the screen goes black.
1. Turning the Switch off after checking the Switch behind of PGM, then turning it
on again after 5 seconds.
2. Reseting after selecting MANU as REMOCON (Setting the MODE as MONITOR).
3. Turning on the Power Switch of REMOCON (Setting the MODE as cg).
ƅ
There is no sound or the visual.
1. Checking the Switch below the right side of MAIN CABINET.
2. Checking the lighting of LED pushing the Play Button of CD-Rom in Main Box.
3. In case LED does not turn on, the CD-Rom has to be replaced because the
problem comes from the CD-Rom.
4. In case LED turns on well, the Main Box has to be replaced because the problem
comes from the Main Box.
ƅ
Visual comes out but no sound.
1. Checking the AMP Volume Switch of COIN DOOR in front of MAIN CABINET
2. Measuring AMP Power Terminal with the Testor. (AMP Box has to be replaced
if you do not measure at least 14V)
ƅ
Billboard light is on, but nothing else is on nor work.
1. The MAIN BOX is condemned.
2. Checking the lighting of LED pushing the Play Button of CD-Rom in Main Box
3. In case LED does not turn on, the CD-Rom has to be replaced because the
problem comes from the CD-Rom.
4. In case LED turns on well, the Main Box has to be replaced because the problem
comes from the Main Box
ƅ
Coin accepter does not work.
1. Checking the Voltage of COIN terminal. (Normally 12V)
2. Checking the Electric Connection if you do not measure at least 12V.
3. If you measure 12V, the COIN sensor has to be replaced.
ƅ
The visual freezes but music continues.
1. Turning the Switch off after checking the Switch behind of PGM, and turn it on
again after 5 seconds.
2. Checking the Cable connection between MAIN CABINET and PGM.
3. Reducing the Size of PGM screen gradually.
4. Checking the operating of FAN in the Main Box because it may be overheated.
ƅ
The visual freezes.
1. Checking the operating of FAN in the Main Box because it may be overheated.
2. Cleaning the CD-Rom in the MAIN BOX.
ƅ
Hear static from the speaker(s).
1. Removing Dust behind FRE AMP
2. If the noise comes from the only one set of speakers, the problem comes from the
speakers.
ƅ
The step sensor does not work well.
1. Checking the inferior sensor with I/O TEST, and Cleaning or Replacing it
2. Checking the electric connection
ƅ
1P and 2P of step sensor do not work well.
1. Checking the problem whether it comes from the Electric Connection or the POOT
PCB through exchanging the wire of 1P and 2P.
2. If there is something wrong in The POOT PCB, it has to be replaced.
ƅ
Step-Lamp does not work.
1. Testing it exchanging with the normal operating Lamp. (Checking whether the problem
comes from the LAMP or INVERTER)
2. Replacing the defected one after testing.
ƅ
Step-Lamp is on all the time.
1. Checking the inferior Sensor with I/O TEST, and cleaning or replacing
ƅ
When the games is in process, the music and the arrows do not match.
1. Cleaning the CD-ROM.
2. Replacing the CD-ROM.
ƅ
The remote does not work for PGM.
1. Checking the REMOCON MODE whether it adjusted as MONITOR or not.
2. Checking the battery of REMOCON.
