Inspection and cleaning / Moving and transportation
P E R C A U T I O N IN HANDLING
• When setting up, inspecting. maintaining,
moving or transporting this product, follow
the procedures and instructions set forth in
this manual and perform such work safely.
• Do not set up, handle, inspect, maintain,
move or transport this product under
conditions equivalent to the condition of
"WARNING" or "CAUTION" specified in this
manual.
• If a new owner is to have this product as a
result of transfer, etc., be sure to give this
manual to the new owner.
Be sure to turn OFF the main power switch
and unplug the power cord from the
receptacle before inspecting or cleaning the
machine.
• Failure to do so could result in electrical shock.
When replacing parts, be sure to use parts of
the correct specifications. Never use parts
other than the specified ones.
• Using improper parts could result in fire or
equipment failure.
There is high voltage inside the machine.
Only qualified industry specialist is allowed to
open the machine's back door. With the back
door open, be very careful not to touch the
monitor and its nearby parts.
• Otherwise an accident or electric shock may
result. Never allow anyone else but
ANDAMIRO's service engineers to open the
upper door on the back of the machine.
If the sub power switch of the service panel is
turned OFF without turning OFF the main
power switch of the power supply unit, some
parts in the units remain live. When opening
the back door, be sure to turn OFF the main
power switch and unplug the power cord from
the receptacle.
• Otherwise, there may be danger an accident or
electric shock.
Strictly refrain from disassembly and repair of
parts which are not indicated in this manual,
as well as settings and remodeling.
• Otherwise, a fire, malfunction or trouble may
result. In case of any trouble, ask your nearest
dealer for repairs and other services.
ANDAMIRO will not resume any responsibility
for the damage to the product attributable to
disassembly and repair of parts which are not
indicated in this manual, as well as settings and
remodeling.
To clean the game machine, wipe it with a soft
cloth dampened in a neutral detergent.
• Using thinner of other organic solvent or alcohol
may decompose the material.
• Electrical shock or equipment failure could be
caused by water entering the inside of the
machine.
The game machine contains parts such as the
monitor, electronic components and precision
components which are sensitive to vibrations
and impacts, Great care therefore should be
taken when moving and transporting the
game machine.
Be sure not to let the machine tip over.
Before moving the machine, be sure to turn
OFF the main power switch, unplug the power
cord from the receptacle and remove the
power cord form the machine.
• Stepping on or tripping over the power cord may
result in an accident or damage to the machine.
Before moving the machine, be sure to fully
lift the four levelers and move it on the
casters.
• Otherwise, an accident, breakage or trouble
may result.
Do not apply a strong force for moving the
machine.
• Otherwise, it may result in an accident or
breakage of the units.
WARNING
CAUTION
