AND UA-651BLE-V Series, Instruction Manual

Page: 11 / 64

E-10
USING THE MONITOR
Connecting the Air Hose
Connecting the AC Adapter
Wireless Function
Insert the air connector plug into the
air socket firmly.
Insert the AC adapter plug into
the DC jack. Then, insert the AC
adapter into an electrical outlet.
The AC adapter part # TB-233,
is sold separately.
☞
In the unlikely event that this monitor causes radio wave
interference to a different wireless station, change the location
where this monitor is used or stop use immediately.
☞
Be sure to use in a location where visibility between the two
devices that you want to connect is good. The connection distance
is reduced by the structure of buildings or other obstructions. In
particular, connection may be impossible when devices are used
on either side of reinforced concrete.
☞
Do not use Bluetooth
®
connection in the range of a wireless LAN
or other wireless devices, near devices that emit radio waves such
as microwaves, in locations where there are many obstructions, or
in other locations where signal strength is weak. Doing so may
result in frequent loss of connection, very slow communication
speeds and errors.
Air Socket
Air Connector Plug
Air Hose
DC Jack
AC adapter Plug
- Use the specified AC adapter. (Refer to E-22)
- When disconnecting the AC adapter from the electrical outlet, grasp
and pull the AC adapter body out of the outlet.
- When disconnecting the AC adapter plug from the blood pressure
monitor, grasp and pull the AC adapter plug our of the monitor.