background image

LIMITED PRODUCT WARRANTY 

Subject to the limitations, exclusions and disclaimers hereof,  AMS warrants exclusively to the original purchaser (the “

Purchaser

”) of this 

Ancona  Range  hood  product  (the  “

Product

”)  that  it  shall  be  free  from  defects  in  material  or  workmanship  (the  “

Limited  Product 

Warranty

”). The duration of the Limited Product Warranty is 12 months from the date of original purchase (the “

Warranty Period

”). 

The  Limited  Product  Warranty  does  not  extend  to  commercial  or  institutional  use  or  installation  and  to  residential  or  domestic  use  or 
installation outside of Canada and the USA. It is not transferable or assignable to any person. 

Any failure of the Product that is not traceable to a defect in material or workmanship is not covered by the Limited Product Warranty. These 
non-warrantable items include, but are not limited to: (i) consumable and accessory parts; such as light bulbs or filters; (ii) service outside of 
Canada  and  the  USA;  (iii)  damage  caused  during  shipping,  handling  or  installation;  (iv)  labour  costs  related  to  installation,  removal, 
reinstallation costs or other contingent expense; or (v) routine replacement of parts due to normal wear and tear of the Product. 

If  the  Purchaser  discovers  within  the  Warranty  Period  a  defect  in  material  or  workmanship,  the  Purchaser  shall  promptly  notify  AMS  in 
accordance with the Warranty Claim Procedure set forth below. Within a reasonable time after such notification, AMS shall, at no charge to 
the  Purchaser:  (i)  perform  any  repair  or  replacement  of  parts  that  it  determines  is  necessary  or  useful  to  correct  any  defect  in  material  or 
workmanship; or (ii) replace the original Product with a new Product, the whole at AMS’ sole and absolute discretion. The remedy provided 
above shall be the Purchaser’s sole and exclusive remedy and AMS' sole and exclusive obligation under the Limited Product Warranty. 

Products or parts that are new or reconditioned to perform as new, shall be exchanged by AMS upon receipt of the original Product or parts 
from  the  Purchaser and,  upon  the completion  of  such  exchange,  the  original  Product  or  parts  shall  become  AMS’  property.  The  Warranty 
Period shall not be extended due to suspension of the use of the Product because of repair, replacement, examination or for any other reason. 

Subject  to  the  Purchaser’s  compliance  with  the  Warranty  Claim  Procedure  set  forth  below,  transportation  and  installation  of  warranty 
replacements shall be performed at AMS’ cost, and AMS shall bear the risk of loss or damage to returned Product or parts while in transit. 

AMS’  Limited  Product  Warranty  shall  be  automatically  void  if:  (i)  any  repair,  alteration,  modification,  customization,  disassembling, 
addition  or  any  other  work  is  performed  on  the  Product  by  any  person  not  authorized  by  AMS  to  do  so;  (ii)  any  alleged  material  defect, 
including  deterioration  or  wear,  is  a  result  of  failure  to  observe  the  manufacturer’s  instructions  or  guidelines,  abuse,  misuse,  improper 
operation, care or maintenance, unusual physical or electrical stress and/or power surges, brown-out, chemical abrasion or improper chemical 
or environmental conditions, leaking, fire, lightning, 

force majeure

 or superior force, accident, error, negligence, or is a result of use for non-

domestic or non-residential purposes or for any purpose other than the Product’s intended purpose; (iii) the Product is operated in conjunction 
with  accessories,  other  products,  ancillaries  or  peripheral  equipments  or  substances  that  have  not  been  previously  approved  in  writing  or 
validated by AMS; or (iv) Purchaser fails to comply with the Warranty Claim Procedure set forth below. 

THE  LIMITED  PRODUCT  WARRANTY  IS  EXCLUSIVE  AND  IN  LIEU  OF  ALL  OTHER  WARRANTIES  OR  CONDITIONS 
INCLUDING,  BUT  NOT  LIMITED  TO,  IMPLIED  WARRANTIES  OR  CONDITIONS  OF  MERCHANTABILITY,  FITNESS  FOR  A 
PARTICULAR  PURPOSE  AND  NON-INFRINGEMENT  OF  THIRD  PARTY  RIGHTS  OF  ANY  KIND,  MADE  OR  INTENDED  BY 
AMS OR ITS AUTHORIZED DISTRIBUTORS. 

IN  NO  EVENT  SHALL  AMS  BE  LIABLE  FOR  DAMAGES  IN  EXCESS  OF  THE  PURCHASE  PRICE  PAID  BY  THE  PURCHASER 
FOR  THE  PRODUCT,  OR  FOR  ANY  INDIRECT,  INCIDENTAL,  SPECIAL,  CONSEQUENTIAL,  PUNITIVE,  EXEMPLARY  OR 
OTHER SIMILAR DAMAGES, WHETHER FORESEEABLE OR UNFORESEEABLE, ARISING OUT OF OR IN CONNECTION WITH 
THE USE OF THE PRODUCT, INCLUDING THE ABILITY OR THE INABILITY TO USE THE PRODUCT. 

The terms hereof and any action in connection therewith, regardless of form, shall be interpreted and construed in accordance with the laws 
of the Province of Québec and the laws of Canada applicable therein, without giving effect to principles of conflicts of laws. If a provision of 
this Limited Product Warranty is determined to be invalid, illegal or unenforceable, all other provisions will remain in full force and effect.

 

WARRANTY CLAIM PROCEDURE 

 

In  the event  a claimable defect occurs,  the  Purchaser shall  call  AMS’  customer  service department  at  1-800-350-4562  in order  to  obtain  a 
return authorization number and shipping instructions (the “

Authorized Shipping Instructions

”). 

The  Purchaser  shall  then  promptly  ship  the  Product,  in  accordance  with  the  Authorized  Shipping  Instructions  with  the  following 
documentation/information: 

 

the name and address of the Purchaser; 

 

the Product model number; 

 

the date and location of the purchase of the Product; 

 

the original sales receipt of the Product; 

 

the complete description of the problem; 

 

the name and address of the installer of the Product. 

Claims must be filled out in writing and received by AMS within six months of the appearance of the claimable defect. 
 

For service and assistance, please call: 1-800-350-4562, or email us at: [email protected] 

22

Summary of Contents for SLIM D























Reviews: