— 10 —
Installation
STEP 6
Mark Placement of Range Hood Mounting Screws
• Use a pencil to mark on the wall the desired placement of the range hood mounting screws.
• Screw two wood screws (not provided) into wall.
• Leave approximately 1/4” (6.3 mm) of the screw head protruding from the wall to allow clearance for mounting the
range hood.
• Use threaded drywall anchors when mounting the range hood onto sheet rock. Mounting the hood into wall studs or
lumbars is highly recommended.
2-3/8”
(60 mm)
1” (25 mm)
1” (25 mm)
2-3/8”
(60 mm)
15” (381 mm)
STEP 7
Mount Range Hood Onto Wall
• Position the range hood’s mounting key holes securely onto the range hood mounting screws.
• Finish screwing in the screws until they cannot tighten any further.
STEP 8
Install Damper
• Place the damper gasket followed by the damper over the ventilation hole on top of the motor body.
• Secure using the four screws (included).
