5. Store excess wires in the wiring box.
6. Drop oil tunnel into recess support near rear of hood. Refer to Figure 8.
7. To install baf
ƀ
e
ſ
lters and stainless spacer(s), refer to
Baf
ƀ
e Filters and Stainless Steel Spacers
on Page 18 for
baf
ƀ
e
ſ
lter and stainless spacer placement. Refer to Figure 9 for the following
ſ
ve steps:
Angle baf
ƀ
e
ſ
lter toward back of hood.
Push baf
ƀ
e
ſ
lter up until almost level.
Slide forward into recess behind the front of hood.
Lower baf
ƀ
e
ſ
lter.
Slide back until it
ſ
ts into resting positions.
8. Repeat Step 7 to install all baf
ƀ
e
ſ
lters and stainless spacers.
9. Turn powe ON in control panel. Check all lights and fan operations.
10. Make sure to leave this Installation Guide for the homeowner.
Figure 6
Figure 9
Figure 7
Figure 8
Installation (Continued) :
Page 11