background image

MADE IN USA

 TWO YEAR WARRANTY

ProLink 500™ Wireless Intercom Owners Manual

For System Setup & Operation Videos Visit Our Website:  www.anchoraudio.com

2

RECHARGEABLE BATTERIES

ProLink 500 belt packs include three “AA” rechargeable batteries and AC gang charger.  
Fully charged batteries yield approximately five hours of continuous use.  Alkaline batteries 
can be used.  Connecting the AC charger to a belt pack with alkaline batteries installed 
could seriously damage the system.

INSTALL BATTERIES

1.  Remove battery door

2.  Install three “AA” NiMH batteries

3.  Replace battery compartment door

CHARGE BATTERIES

1.  Connect gang charger (included) into charg-

ing port on the bottom of the belt packs

2.  Plug gang charger into AC outlet for minimun 

of five hours   
LED ON = battery charging 
LED OFF = battery charged

WHAT IS PROLINK 500™?

 

ProLink is a digital wireless, full duplex intercom system that is easy to configure and 
easy to operate.  You can operate the MASTER belt pack with up to three REMOTE 
belt packs which are identified on the side label as R1, R2 or R3. You may also have 
an option of unlimited number of “Listen Only” beltpacks.The transmitter and receiver 
operate in the license free 902-928 MHz range without the need for a base station. 

DEFINITIONS AND APPLICATIONS

 

 

ProLink 500 - wireless duplex intercom system 

 

ProLink 500 Network - requires a MASTER belt pack and includes up to three REMOTE belt packs

 

           

(option of unlimited number of “Listen Only” beltpacks)

 

 

Channel - A or B channel selection for different applications

E x A M P l E   1   -   O n e   n e t w o r k

E x A M P l E   2   -   T w o   i n d e p e n d a n t   n e t w o r k s   i n   t h e   s a m e   f a c i l i t y

E x A M P l E   3   -   D i r e c t o r   o r   c o a c h   t a l k i n g   a n d   l i s t e n i n g   b e t w e e n   t w o   c h a n n e l s 

r e q u i r e s   t h e   f o l l o w i n g   c o n f i g u r a t i o n

MASTER 

BP-500M 

Channel A

MASTER 

BP-500M 

Channel A

MASTER 

BP-500M 

Channel A

MASTER 

BP-500M 

Channel B

MASTER 

BP-500M 

Channel B

REMOTE 1 

BP-500R 

Channel A

REMOTE 1 

BP-500R

CHANNEL A

CHANNEL B

REMOTE 1 

BP-500R 

Channel A

REMOTE 2 

BP-500R 

Channel A

REMOTE 2 

BP-500R 

Channel B

REMOTE 3 

BP-500R 

Channel A

REMOTE 3 

BP-500R 

Channel B

REMOTE 1 

BP-500R 

Channel B

REMOTE 2 

BP-500R 

Channel A

REMOTE 2 

BP-500R 

Channel A

REMOTE 2 

BP-500R 

Channel B

REMOTE 3 

BP-500R 

Channel A

REMOTE 3 

BP-500R 

Channel A

REMOTE 3 

BP-500R 

Channel B

Head coach or director toggles between Channel 
A and Channel B for conversations between a two 
ProLink networks

This is an assigned group such as the 

offense coach or lighting crew

This is an assigned group such as the 

defense coach or sound crew

Caution:  Do not attempt to charge alkaline batteries. 
 

Some users are required (for emergency preparedness, etc.) to leave their 

ProLink 500 units plugged into the charger at all times.  

For those applications we recommend replacing the batteries every 12 

months.

SYSTEM RANGE

The RF signal will travel through many solid objects.  However, the more solid 
objects between the belt packs, the more the range will be reduced. When the belt 
packs are transmitting, the Transmit LED will flash red. If the signal drops out, the 
LED will glow solid red on REMOTE belt packs only. If the belt packs are too far 
apart, the REMOTE belt packs need to move closer to the MASTER belt pack.  

Summary of Contents for ProLink 500







Reviews: