3
6
CARING FOR YOUR BUILT-IN BATTERIES
It is very important that you fully charge the batteries in your new sound system before the first time its used. To preserve battery life
it is also recommended that batteries be fully charged as soon as possible after every use regardless of the length of operation.
UNDERSTANDING THE BATTERY LEVEL INDICATOR LIGHT
LED Flashing Red Battery charge is very low, in 15-30 minutes the Battery Protection Circuit will turn the system off
LED Off
Battery is completely drained and must be charged
NOTE: System Can Be Used When Batteries Are Being Charged!
OPERATING ACCLAIM IN AC MODE
Plug your sound system into an AC outlet and operate as normal while charging the built-in batteries at the same time. The Char-
ger LED will light during charging and flash when the battery is fully charged.
BATTERY SERVICE TIME
With the batteries fully charged you can expect approx.:
6-8 hrs @ Medium Volume 2-4 hrs @ Full Volume
Of continuous music input
(longer for speech). However service time will vary depending on control settings and the use of acces-
sories
(built-in CD player, wireless receivers and/or a companion speaker).
IMPORTANT: Always Store Your System w/ Batteries Fully Charged!
SYSTEM STORAGE & BATTERIES
Always store your sound system with the batteries fully charged. For extended periods of storage leave the system plugged into an
AC outlet. If this is not possible, charge the system at least once each month for a minimum of 24 hours.
CHARGING YOUR BUILT-IN BATTERIES
An automatic charging system is built-in to your Acclaim Lectern Sound System. It is designed to properly charge and maintain the
systems built-in batteries. To charge the batteries:
1. Plug the power cord into your sound system
2. Plug the other end of the cord into AC outlet
(Charger LED will stay on during charging)
3. Batteries will be fully charged in approximately 6-8 hrs
(Charger LED will flash)
When in AC mode the system automatically transfers power from the battery charger to the power amplifier at high volume output,
causing the Charger LED to flicker.
ACCLAIM ACCESSORIES
LIB-6001- Companion Speaker
Unpowered companion speaker
(speaker cable not included)
SC-50 - Heavy Duty Speaker Cable
50’ speaker cable, connect EXP-6001 to powered Acclaim
SS-550 - Heavy Duty Speaker Stand
Adjustable stand made of black, anodized aluminum
ACC-BASE - Base for Acclaim
Acclaim lectern base & traveling case
MIC-90 - Handheld Wired Microphone
Anchor’s dynamic, balanced, low impedance microphone w/
unidirectional pick-up pattern, mic “on/off” switch & 20’ cable
ANCHOR WIRELESS - 16 CHANNEL UHF
WH-6000 - Handheld Microphone/Transmitter
Wireless transmitter & microphone in one unit
WB-6000 - Body Pack Transmitter
Works w/ hands free microphones
(mic not included)
Body Pack Transmitter Microphones:
CM-60 - Collar Microphone
Lightweight, low-profile mic
EM-60T - UltraLite Microphone
Hands free “Over-the-Ear” mic
LM-60 - Lapel Microphone
Lightweight, clip-on lapel mic
HBM-60 - Headband Microphone
Ultra-lightweight headband mic
DIVERSITY WIRELESS BY ANCHOR AUDIO
Anchor Audio UHF wireless is a 16 channel, diversity wireless system that receives signals with two independent antennae.
With diversity wireless the receiver processes the stronger signal, effectively minimizing dropouts and interference from other
transmitting sources. The antennae are mounted internally so there are no obstructions or risk of damage.
CHANNEL SELECTION - BUILT-IN RECEIVER
Select a channel, set the built-in receiver and
microphone transmitter to that channel before
using your wireless system.
1. Choose any available wireless channel/
frequency from 1 thru 16
(transmitter instructions - page 7)
2. Set the Wireless Channel Selector Knob
to the channel/frequency you choose in
step 1 above
Remember, to operate the receiver & transmit-
ter pair must be set to the same channels.
NOTE: Ongoing wireless interference? The frequency you selected may be in use by
other systems in the area! Change channels until you find a clear frequency!
WIRELESS MICROPHONE
VOLUME CONTROL
WIRELESS RECEIVER CHANNEL
SELECTION KNOB
RX INDICATOR LIGHTS
NEED MORE HELP? View demonstration videos on proper system setup and operation:
www.anchoraudio.com/acclaim.php
BATTERY LEVEL
INDICATOR LIGHT
CHARGER
INDICATOR LIGHT
