ANCHEER
24
Warnings
Operation Details:
Charging the battery with an incompatible battery charger may result in electrical fires,
explosion, severe burns or electrocution. Ensure the battery charger and the A/C outlet
are the same voltage before charging the battery. Only charge the battery using the
battery charger specified by the instructions. Never use the battery charger to charge
any other batteries.Battery Charging Environment.
Battery can be charged on or off the bike. Locate both the battery and battery charger
indoors, in a clean, dry area with good ventilation to charge. Always place the battery
and battery charger on an even surface. Ensure the area is free from dust, moisture,
combustibles and keep the battery charger ventilation openings unobstructed.
If applicable, always turn the power switch on the battery off before attaching the
charger.
Contact between the battery contacts and metal objects such as paper clips, coins,
keys, nails, screws or other metal items could result in shorting out the battery and
cause electrical fires, explosion, or severe burns.
Correct tightening force on fasteners- nuts, bolts, screws- on your bicycle is important.
Too little force, and the fastener may not hold securely. Too much force, and the fastener
can strip threads, stretch, deform or break. Either way, incorrect tightening force can
result in component failure, which can cause you to loose control and fall.
Loose or damaged handlebar grips or extensions can cause you to lose control and
fall. Unplugged handlebars or extensions can cut you and cause serious injury in an
otherwise minor accident.
The area in which you ride may require specific safety devices. It is your responsibility
to familiarize yourself with the laws of the area where you ride and to comply with all
applicable laws, including properly equipping yourself and your bike as the law requires.
Observe all local bicycle laws and regulations. Observe regulations about bicycle
lighting, licensing of bicycles, riding on sidewalks, laws regulating bike path and trail
use, helmet laws, child carrier laws, special bicycle traffic laws. It’s your responsibility
to know and obey the laws. Failure to wear a helmet when riding may result in serious
injury or even death.
Do not remove the front or rear reflectors or reflector brackets from your bicycle. They
are an integral part of the bicycle’s safety system. Removing the reflectors reduces your
visibility to others using the roadway.Being struck by other vehicles may result in serious
injury or death.The reflector brackets may protect you from a brake straddle cable catching
on the tire in the event of brake cable failure. If a brake straddle cable catches on the tire, it
can cause the wheel to stop suddenly, causing you to lose control and fall.
Ɣ
1.
2.
3.
4.
Ɣ
Ɣ
Summary of Contents for AMA005757
Page 1: ... Caution Please read the manual before your first ride ...
Page 2: ... ...
