Copyright © 2006-2015Shenzhen ANB Technology Co., Ltd. All rights reserved.
3) General Setting
4) Profile Parameters Setting
5) Other Setting includes Battery level, LED light Switch ON/Off and USB working modes
5.1 Operation Menu:
Please find the Operation menus instruction as follows:
-
Default Data
Inside the configurator, we build up total 5 default data based on typical application with
different battery lifetime cases, which can help client to do quick configuration for CT2000.
-
Load from file
Click this button to load device settings from file which you have saved last time.
-
Save to File
Click this button to save manually entered setting to a file.
-
Read from flash
Read settings that are already stored in CT2000 device.
-
Write to flash
Save the settings to CT2000 memory.
-
Get IMEI
Read CT2000 modem IMEI number.
-
COM port
Click this drop-down list to choose which COM port is used by CT2000 to connect to PC.
-
Refresh button
Click it to refresh all available ports on PC. This button is used when you connect CT2000 to
PC while Configurator software is already launched, but it did not detect Virtual COM Port yet.
-
Addition Functional Buttons
•
Device startup:
Click this button to test data acquisition and data sending.
After this button was clicked, device will wake up from sleep, and open GPS to locate and send
current location data once to remote server.
•
Get Version:
To get device firmware version inside the CT2000 device
•
Collate Time: