30
User manual Zitzi Starfish Pro
www.anatomicsitt.com | +46 11 16 18 00
Harnesses
Mounting of the harnesses (Sternum support, H-strap)
Upper mounting bracket (pic 1):
* Release the protection cap on the profile.
* Mount the upper mounting as described in the picture 1.
* Open the buckle (A), slide the straps through the hole in
the mounting and through the buckle and lock the buckle.
Lower mounting bracket (pic 2):
The lower mounting is included in the chair always. Lock the
strap with the help of the tri-glide buckle as pic 3 shows.
pic 2
pic 1
Bracket or pipe
Mounting with Tri-glide method.
pic 3
Adjustment:
Seat the patient in the seat and release the socket head screw according to position
B & C (pic 1).
Adjust the arms so that the angle of force on the upper mounting points ends up in
the same height as the shoulders.
•
Attach the screw according to position B (pic 1).
•
Adjust to desired width by angling the hardware to the right or left. (make sure
that it is enough space for the neck).
•
Lock the screws according to position C (pic 1) .
•
Adjust the pads in height to give the best pressure relief.
Subsequent verification:
•
Make sure that there is enough space by the neck.
•
Pressure on the strap.
•
Placement of the pads.
A
B
C
Make sure that there is enough space for the neck.
