35
User manual Zitzi Starfish Pro
www.anatomicsitt.com | +46 11 16 18 00
Mounting of the tip guard
Remove the wheel by unscrewing screw (A) and washer (B).
Screw on the stop screw (C).
Try to hold the tip guard (D) so that the large hole is against the larger hole in
the chassis and the stop screw enters the smaller hole on the tip guard without
piercing. If the stop screw passes through, screw it in slightly more.
If the screw is too long screwed in so it does not prevent the antitipper from
rotating, screw it out slightly. Continue to hold the antitipper in the same place and
now lead screw (A) through tray (B) and the wheel, and through the antitipper and
screw it into the chassis.
Antitipper
A
B
D
C
