1-33
J
ULY
2013
GTR 8000 Base Station Service Manual
Glossary
EEPROM
Electrically Erasable Programmable Read-Only Memory
ESD
Electrostatic Discharge
FAP
Feature Access Protection
FCC
Federal Communications Commission
Family
Hardware
Attributes of the hardware that remain constant throughout the life of the
platform, such as connector location.
FPGA
Field Programmable Gate Array
FRU
Field Replaceable Unit
GMII
Gigabit Media Independent Interface
GPCM
General Purpose Chip-select Machine
GPIO
General Purpose Input / Output
GPS
Global Positioning System
GPSR
GPS Receiver
HPD
High Performance Data
IAC
Integrated Alarm Card. The IAC circuitry is physically located on the SCB
on all P2 and later Site Controllers.
I
2
C
Inter-Integrated Circuit: a bidirectional 2-wire bus for efficient inter-IC
control
ICD
Interface Control Document
iDEN
Integrated Digital Enhanced Network
IPI
Inter-Processor Interrupt
I/F
Interface
IRQ
Interrupt ReQuest
IV&D
Integrated Voice and Data
JTAG
Joint Test Action Group: Committee that established the test access port
(TAP) and boundary-scan architecture defined in IEEE Standard 1149.1-
1990, a standard specifying how to control and monitor the pins of
compliant devices on a printed circuit board.
LAN
Local Area Network
Table 1-20
Acronyms and Abbreviations (continued)
Acronym/
Abbreviation
Definition