1-29
J
ULY
2013
GTR 8000 Base Station Service Manual
General Installation Standards and Guides
N
OTE
Do not use a computer as a ground, because it is not plugged in during installation.
FCC Requirements
Radio frequency (RF) transmitters installed at sites within the US must be in compliance with
the following FCC regulations:
•
The station licensee shall be responsible for the proper operation of the station at all times
and is expected to provide observations, servicing and maintenance as often as may be
necessary to ensure proper operation.
•
The transmitter ERP shall not exceed the maximum power specified on the current station
authorization.
•
The frequency of the transmitter must be checked during initial installation of the
transmitter, when replacing modules, or when making adjustments that affect the carrier
frequency or modulation characteristics.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference to radio communications when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio frequency energy. If not installed properly
and used in accordance with the instruction manuals, the equipment may cause harmful
interference to radio communications. Operation of some compliant equipment in a residential
area may cause harmful interference to radio communications, in which case the user is required
to correct the interference.
