Anaren A110LR09x, User Manual

Page: 12 / 38

Page 12 of 38 A110LR09x
– User’s Manual
Release Date 10/31/11
2. Product Approvals
The A110LR09A and A110LR09C have been designed to meet most national regulations for
worldwide ISM-band use. In particular, the radio modules have been certified to the following
standards.
2.1. USA (Federal Communications Commission, FCC)
The A110LR09A, with integrated antenna, as well as the A110LR09C, used with the antenna
listed in
Table
1 below, have been tested to comply with FCC Part 15 -
15.247 “Intentional Radiators.”
The devices meet the requirements for modular transmitter approval as detailed in FCC public
notice DA 00-1407 Released: June 26, 2000. The A110LR09A and A110LR09C modules can
be integrated into a finished product without obtaining subsequent FCC approvals for intentional
radiators.
(15.19a3) The module complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Table 1 Approved Antennae
Item Part Number Manufacturer Type Gain
1 Integral part of A110LR09A Anaren Integral Antenna 0 dBi
2 66089-8906 Anaren Monopole whip, 6 mm lead 2 dBi
2.1.1. FCC Labeling Requirements
The A110LR09A and A110LR09C modules have been labeled with their own FCC ID number and if the
FCC ID is not visible when the module is installed inside another device, then the outside of the finished
product into which the module is installed must also display a label referring to the enclosed module.
This exterior label can use wording such as the following: